NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY
Model No.: BL019
Type: Cooling System, Windscreen Wiper System
Muffler Type: Rear Muffler
Surface Finish: Shot Peening, Electrophoresis Coating
Cavity Number: 2
Packaging: carton, PE pallet, PE flow box, steel box, wooden pallet, container
Place of Origin: NINGBO
Supply Ability: 200000/MONTH
HS Code: 7616991090
Customized Base Machined Parts CNC Machining ,
the material for this part is ADC-12, a kind of material, having good fluidity, which is good for filling while Die Casting. This material is a good material to produce end cover, housing, gearbox, bracket etc.
For this part, should pay attention to the loose.
Feature: loose and non tight macrostructure on the surface of casting.
1, mold temperature is too low.
2. The casting temperature is too low.
3, small specific pressure.
4, too much paint.
1, to improve the mold temperature to the working temperature.
2. Appropriately increase the pouring temperature of alloy.
3, increase the specific pressure.
4, the coating is thin and uniform.
Die Casting is a technology that, press the melting aluminum under high pressure, high speed, usually the shot procedure will be finished in a few seconds. In this case, there probably be air trapped because of turbulence, eddy, so the porosity is unavoidable, but can be decreased or improved. Usually, in die casting factory, visual porosity on machining surface is not allowed, so the solution is to simulate or validate sufficiently by mold flow analysis prior to the building of the tooling, to ensure the density of the casting, by locating the major injection gate, cross gate, runner, the venting system reasonably.
Then, for the machining work of this part, it is a part of High Precision Machining tolerance, the tolerance is around ±0.025 mm, so for the machining facility, machining cutter, they should be rigid, stable enough. In production, there should be first article inspection, final article inspection, routine inspection during process flow, including definite inspection frequency. Of course, because of the limit of the qty of inspector, the more important point is that, the operator should make self inspection during machining work.
Cavity Number: 2
Process Technology: High pressure die casting, Cold Chamber
Product Dimensions: Customized
Casting General Tolerance: Grade GB-CT4
Surface Finish: Polishing, Shot Peening
Flow Processes: Die casting, Degating, Deburring to remove the flash around the ejector pins, Polishing to remove the parting line, Shot peening to make the part more consistency, High Precision CNC Lathe Machining, E-coating, Cleaning, Packaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Auto Parts
Lead Time: 30-35 days
Trade Term: FOB Ningbo
Looking for ideal Machined Parts CNC Machining Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the CNC Machined Parts Die Casting are quality guaranteed. We are China Origin Factory of Customized Base Machined Parts CNC Machining. If you have any question, please feel free to contact us.
Copyright © 2019 NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY All rights reserved.